Complete hardware sets for tilt & turn and casement windows, plus the individual fittings that window fabricators, system houses and distributors order in volume. Materials are zinc alloy, aluminium alloy and stainless steel; surface finishes are matched to your market.
Each series is a matched set for one sash: handle, espagnolette or transmission rods, locking points, hinges and keeps, with aluminium rods cut to your sash dimensions. Series below differ in locking arrangement and the sash sizes they are developed for — tell us your window schedule and we will select the right one.
| Series | Locking arrangement | Typical application | Notes |
|---|---|---|---|
| NPD100 | Single-side, two locking points | Inward-opening casement windows with micro-ventilation position | Ventilation gap setting for controlled air exchange |
| NPD200 | Single-side, two locking points | Standard inward-opening casement windows | Compact set for narrow sashes |
| NPD370 | Two-side, multi-point locking | Tilt & turn windows; cutting formulas published for on-site rod cutting | Documented installation layout and rod cutting formula |
| NPD600 | Two-side, multi-point locking | Tilt & turn windows with larger sashes | Matched hinge and locking-point positions |
| NPD800 | Two-side, multi-point locking | Tilt & turn windows — heavy sash versions | Selected when sash weight and size demand more support |
Dimensional data, rod cutting formulas and locking-point positions are issued per series and window type. Ask for the drawing package for your sash sizes.
A transmission rod with an integrated block locking device: the sash cannot be closed or opened in the wrong sequence, which protects the hardware when the handle is turned while the window is still open or tilted.
A small pull rod with an adjusting screw that takes up play between the handle and the locking linkage, so the sash can be pulled tight against the frame for sealing.
Straight and corner-driven transmission elements that connect the handle to every locking point on the sash, supplied cut to length or in stock lengths.
Handles are matched to the hardware system so the spindle, backset and locking function work with the rod set you ordered. Finishes are selected to suit the profile colour and the climate of your market.
Standard and slim-line casement handles for inward- and outward-opening windows, with locking and non-locking versions.
Handles for espagnolette and two-point locking systems, with the gear and spindle matched to the transmission rod set.
Seven-shaped (grip) handles widely used on aluminium windows, in left and right versions, with key-locking options.
Handles developed for two-point lock series, keeping the locking action positive on small and mid-size sashes.
Combined handle designs for windows with integrated security mesh, so the mesh panel and sash are operated by one fitting.
Door handles and matching fittings for aluminium and uPVC doors, in the finish family used across the window range.
Visible hinges for aluminium and uPVC casement sashes, supplied in left and right versions with the profile groove matched.
Concealed hinges for tilt & turn and casement windows, sitting inside the profile groove so the hardware disappears when the window is closed.
Friction stays for top-hung, side-hung and curtain-wall ventilation sashes: they hold the sash open at any angle and take the wind load.
Stainless steel is used for load-bearing and exposed parts; the correct stay size depends on sash width, height and weight — send the sash data with your inquiry.
Two-point locking units for casement windows, used across the NPD single-side series and as a replacement part.
Crescent locking hardware for aluminium and uPVC sashes, including key-locking versions for windows that must be secured.
Lock bodies for window and door applications, with the keep and strike plate matched to the profile.
Strike and keep plates for aluminium and uPVC doors, finished to match the handle range.
Bolt hardware for door leaves and secondary leaves, in surface-finished zinc or stainless steel.
Keeps and locking points that complete a transmission rod run — supplied individually or as part of a full sash set.
Handle sets developed for uPVC casement and tilt & turn windows, including combined handle-and-latch versions.
Hinge and latch hardware sized for PVC profile chambers and wall thickness, with screw positions matched to common PVC systems.
Transmission rods for PVC window systems, supplied in stock lengths for cutting or cut to your sash dimensions.
Sliding window and door rollers with adjustable height, in moulded and metal-bodied versions for different loads.
Lock keeps and hook components that complete the locking side of a PVC sash.
Fittings can be supplied in neutral packing or your own branded packaging for distribution.
Hardware for top-hung ventilation sashes in curtain walls and high-level windows, operated by handle or rod.
Rollers, locks, handles and keep sets for sliding aluminium and uPVC windows and doors.
Lock, handle and hinge hardware for outward- and inward-opening casement doors.
Hardware for composite windows combining an aluminium outer shell with a PVC core, where the fitting must suit both materials.
Components for thermal-break (insulated) window systems, where hardware placement must not interrupt the insulation zone.
Lock and handle hardware for aluminium and uPVC door leaves, including locks with multi-point operation.
| Material | Typical use | Available finishes |
|---|---|---|
| Zinc alloy (die cast) | Handles, lock bodies, hinge components, keep plates | Polishing, electroplating, powder coating |
| Aluminium alloy | Transmission rods, handles, structural fittings | Anodising, powder coating, painting |
| Stainless steel | Friction stays, load-bearing and exposed parts | Polished or brushed |
| Engineering plastics | uPVC fittings, rollers, end caps and guides | Moulded colour, UV-stabilised grades |
Finish and colour are matched to your profile system and to the corrosion demands of your market. Tell us the market and climate at inquiry stage.
Not sure which series fits? Send us the profile drawing and sash sizes — we will come back with the recommended set, the drawings and a quotation. Go to the inquiry form →
Tell us which product families you buy and for which country — we will send the matching catalogue, sample availability and terms.